Attic Insulation in Greater Gainesville
Blow-in or blown fiberglass insulation is a good choice when insulating your attic. A special machine shreds the fiberglass and then blows it through an application hose to properly cover and insulate the space. Dr. Energy Saver can provide blown cellulose, blown fiberglass, fiberglass batts or denim batts for different applications.
Upgrading attic insulation is a VERY popular energy-saving improvement because more energy (and money!) is lost through the attic than through any other part of the house.
What makes matters worse is improperly or poorly installing inadequate attic insulation. Existing attic insulation in many homes may be as minimal as R-19-- which pales in comparison to the recommended R-value!
Going through a cold winter with so little insulation is like wearing a t-shirt in a snowstorm. What your house really needs is the equivalent of a thick down-filled parka.
The U.S. Department of Energy recommends between R-49 and R-60 of attic insulation in Gainesville, Orange Park, Saint Augustine, and other areas. That's at least a 16-in.-thick blanket of fiberglass insulation!
Increase the R-value, air seal leakage, and enjoy energy savings and comfort!
Contact us today to schedule your home energy audit to identify where your home is in need of more insulation. Our audit also diagnoses the other energy issues in your home-- which may be the larger factors in your home's high utility bills and discomfort.
We offer Free Estimates for attic insulation in Saint Augustine, Gainesville, Orange Park, Middleburg, Lake City, Ponte Vedra Beach, Palm Coast, Green Cove Springs, Saint Johns, Palatka, and the neighboring locations. We also offer a unique system called the SuperAttic™ System, which adds a continuous & airtight layer of foam insulation beneath the attic rafters and inside the attic's gable walls.
Insulating your attic to recommended levels can cut heating and cooling costs by 20% or more.
If inadequate attic insulation is costing you money,
Dr. Energy Saver can help.
Air Sealing Goes Alongside Attic Insulation
Baffles keep ventilation channels open. Plastic spacers are installed between rafters in the attic to maintain a vent space beneath the roof surface after new insulation is installed.
Air sealing is a critical step when insulating an attic because sealing air leaks stops conditioned interior air from leaking into the attic. Dr. Energy Saver uses a variety of materials and techniques to stop this energy-wasting air leakage.
Installing baffles ensures proper attic ventilation. Sized to fit between the rafters in the attic, plastic baffles maintain a ventilation space between the attic's soffit vents (located along the eaves) and the ridge vent. Installing baffles before adding more attic insulation helps avoid damage from ice damming and excess moisture.
Old insulation can be reused, most of the time. As long as the existing insulation is not wet, moldy or overly compressed, it can usually be put back into place after the attic has been air-sealed and before new insulation is installed.
Start Saving Energy and Money With An Attic Insulation Upgrade.
Call 1-888-370-6924 or contact us online to schedule a home energy audit or a Free Estimate for home insulation in Orange Park, Saint Augustine, Gainesville, and in and around Palm Coast, Middleburg, Lake City, Palatka, Green Cove Springs, Saint Johns, Ponte Vedra Beach, and Keystone Heights.
Be sure to check out our specialized SuperAttic™ System for continuous & airtight coverage.
Looking for a price? Get a no cost, no obligation free estimate.